WiFi Dev Board GPS Expansion
This adapter PCB attaches directly to the Flipper Zero WiFi Dev Board, providing a user friendly way to add SD and GPS capabilities to your Flipper Zero WiFi Dev Board. This will allow firmwares like ESP32 Marauder to use its external storage capability and wardriving functions. In addition to SD and GPS capability, this board features UART activity LEDs for the purpose of verifying serial communication without the use of an external debugging or display module.
If you would like an enclosure to contain and protect your dev board with the GPS expansion, check out the Flipper Zero WiFi Dev Board Expansion Enclosure.
Installation
Installation is as simple as placing the adapter PCB against the back of the Flipper Zero WiFi Dev Board and soldering each connection. There are no wires needed.
Usage
My main intention when designing this board was to use it in conjunction with the ESP32 Marauder firmware. The Marauder firmware has the ability to capture WiFi and location data and save it to an external storage device like a Micro SD card. With the adapter board properly installed and the proper Micro SD card chosen and formatted, the Marauder firmware will recognize the storage device and use it to save the captured WiFi and location data. The included GPS module can be utilized for wardriving, coupling location data with wireless access point data.
What's Included
- 1x WiFi Dev Board SD GPS Adapter
- 1x Ceramic GPS Antenna
Disclaimer
All products sold by JustCallMeKoko LLC are intended for lawful, ethical, and educational use only. These devices are designed for network security assessments, penetration testing, and cybersecurity research by authorized individuals.
It is the sole responsibility of the purchaser to comply with all local, state, and federal laws when using these products. JustCallMeKoko LLC does not condone or support any illegal activity and cannot be held liable for misuse or unlawful application of the hardware sold.
By purchasing from JustCallMeKoko LLC, you agree to use these products in a manner consistent with all applicable laws and assume full responsibility for their use.
International Customers
Please see our shipping policy regarding import duties and forwarding services prior to placing your order.
Resources
If you're interested in learning more or you have any questions, consider checking out the following links. You'll find helpful YouTube videos, additional project content, and other like-minded folks.
- Discord
- YouTube
More Images
WiFi Dev Board GPS Expansion
This adapter PCB attaches directly to the Flipper Zero WiFi Dev Board, providing a user friendly way to add SD and GPS capabilities to your Flipper Zero WiFi Dev Board. This will allow firmwares like ESP32 Marauder to use its external storage capability and wardriving functions. In addition to SD and GPS capability, this board features UART activity LEDs for the purpose of verifying serial communication without the use of an external debugging or display module.
If you would like an enclosure to contain and protect your dev board with the GPS expansion, check out the Flipper Zero WiFi Dev Board Expansion Enclosure.
Installation
Installation is as simple as placing the adapter PCB against the back of the Flipper Zero WiFi Dev Board and soldering each connection. There are no wires needed.
Usage
My main intention when designing this board was to use it in conjunction with the ESP32 Marauder firmware. The Marauder firmware has the ability to capture WiFi and location data and save it to an external storage device like a Micro SD card. With the adapter board properly installed and the proper Micro SD card chosen and formatted, the Marauder firmware will recognize the storage device and use it to save the captured WiFi and location data. The included GPS module can be utilized for wardriving, coupling location data with wireless access point data.
What's Included
- 1x WiFi Dev Board SD GPS Adapter
- 1x Ceramic GPS Antenna
Disclaimer
All products sold by JustCallMeKoko LLC are intended for lawful, ethical, and educational use only. These devices are designed for network security assessments, penetration testing, and cybersecurity research by authorized individuals.
It is the sole responsibility of the purchaser to comply with all local, state, and federal laws when using these products. JustCallMeKoko LLC does not condone or support any illegal activity and cannot be held liable for misuse or unlawful application of the hardware sold.
By purchasing from JustCallMeKoko LLC, you agree to use these products in a manner consistent with all applicable laws and assume full responsibility for their use.
International Customers
Please see our shipping policy regarding import duties and forwarding services prior to placing your order.
Resources
If you're interested in learning more or you have any questions, consider checking out the following links. You'll find helpful YouTube videos, additional project content, and other like-minded folks.
- Discord
- YouTube
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This adapter PCB attaches directly to the Flipper Zero WiFi Dev Board, providing a user friendly way to add SD and GPS capabilities to your Flipper Zero WiFi Dev Board. This will allow firmwares like ESP32 Marauder to use its external storage capability and wardriving functions. In addition to SD and GPS capability, this board features UART activity LEDs for the purpose of verifying serial communication without the use of an external debugging or display module.
If you would like an enclosure to contain and protect your dev board with the GPS expansion, check out the Flipper Zero WiFi Dev Board Expansion Enclosure.
Installation
Installation is as simple as placing the adapter PCB against the back of the Flipper Zero WiFi Dev Board and soldering each connection. There are no wires needed.
Usage
My main intention when designing this board was to use it in conjunction with the ESP32 Marauder firmware. The Marauder firmware has the ability to capture WiFi and location data and save it to an external storage device like a Micro SD card. With the adapter board properly installed and the proper Micro SD card chosen and formatted, the Marauder firmware will recognize the storage device and use it to save the captured WiFi and location data. The included GPS module can be utilized for wardriving, coupling location data with wireless access point data.
What's Included
- 1x WiFi Dev Board SD GPS Adapter
- 1x Ceramic GPS Antenna
Disclaimer
All products sold by JustCallMeKoko LLC are intended for lawful, ethical, and educational use only. These devices are designed for network security assessments, penetration testing, and cybersecurity research by authorized individuals.
It is the sole responsibility of the purchaser to comply with all local, state, and federal laws when using these products. JustCallMeKoko LLC does not condone or support any illegal activity and cannot be held liable for misuse or unlawful application of the hardware sold.
By purchasing from JustCallMeKoko LLC, you agree to use these products in a manner consistent with all applicable laws and assume full responsibility for their use.
International Customers
Please see our shipping policy regarding import duties and forwarding services prior to placing your order.
Resources
If you're interested in learning more or you have any questions, consider checking out the following links. You'll find helpful YouTube videos, additional project content, and other like-minded folks.
- Discord
- YouTube
